| Print Speed | 3.1 Lines/sec |
| Auto-Cutter | SP2520/2560 |
| Line Spacing | 1/6", 1/8", 1/13", 1/72", 1/144" (n/144") |
| Resolution | 9-pin serial impact dot matrix |
| No. of Columns | 42 (7 x 9 font), 35 (5x9 font) |
| Width | 76mm (3") |
| Thickness | 1 ply: 0.07mm to
0.10mm 2 ply: Max. 0.14mm 3 ply: Max. 0.20mm For Multi-Part paper: Each ply should be 0.05mm to 0.08mm Max. |
| Roll Diameter | 85mm Max. (3.35") |
| Reliability Printer Cutter |
MCBF 18 Million
lines, Printhead - 70 Million characters 0.5 Million cuts |
| Operating Conditions Temperature Humidity |
0° C to 50°C 10% to 80% RH |
| Interface | Serial (RS232C) or Parallel (IEEE1284) |
| Data Buffer | 4K bytes or 256 bytes |
| Emulation | Star Mode, ESC/POS™ |
| Auto-Cutter | Full & Partial Cut |
| Drivers | Windows9x/NT/2000, OPOS, JavaPOS™ |
| Safety Standards | UL, C-UL, TUV |
| Case Color | Putty or Charcoal |